|
Cab signalling is a railway safety system that communicates track status information to the cab, crew compartment or driver's compartment of a locomotive, railcar or multiple unit, where the train driver or engine driver can see the information continuously. The simplest systems display the trackside signal or a simplified set thereof, while more sophisticated systems also display allowable speed, location of nearby trains, and dynamic information about the track ahead. Cab signals can also be part of a more comprehensive train protection system that can automatically apply the brakes and bring the train to a stop if the operator does not respond appropriately to a dangerous condition.〔''Elements of Railway Signaling'', General Railway Signal (June 1979)〕 == Overview == The main purpose of a signal system is to enforce a safe separation between trains and to stop or slow trains in advance of a restrictive situation. The cab signal system is an improvement over the wayside signal system, where visual signals beside or above the right-of-way govern the movement of trains, as it provides the train operator with a continuous reminder of the last wayside signal or a continuous indication of the state of the track ahead. The first such systems were installed on an experimental basis in the 1910s in the United Kingdom, 1920s in the United States, and later in the Netherlands in the 1940s. Modern high-speed rail systems such as those in Japan, France, and Germany were all designed from the start to use in cab signalling due to the impracticality of sighting wayside signals at the new higher train speeds. Worldwide, legacy rail lines continue to see limited adoption of Cab Signaling outside of high density or suburban rail districts and in many cases is precluded by use of older intermittent Automatic Train Stop technology. In North America, the coded track circuit system developed by the Pennsylvania Railroad (PRR) and Union Switch & Signal (US&S) became the de facto national standard. Variations of this system are also in use on many rapid transit systems and form the basis for several international cab signalling systems such as CAWS in Ireland, BACC in Italy, ALSN in Russia and the first generation Shinkansen signalling developed by Japan National Railways (JNR). In Europe and elsewhere in the world, cab signalling standards were developed on a country by country basis with limited interoperability, however new technologies like the European Rail Traffic Management System (ERTMS) aim to improve interoperability. The train-control component of ERTMS, termed European Train Control System (ETCS), is a functional specification that incorporates some of the former national standards and allows them to be fully interoperable with a few modifications. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Cab signalling」の詳細全文を読む スポンサード リンク
|